1-888-285-4275
Sign In
Shopping Cart
tu71z mlr 1_2
- Description
- Ask a Question
- Reviews
The first generation of the Zero has been a game changer for the industry. The first lightweight, cool arborist chainsaw pants. With Zero, you don’t sweat all day long when you are climbing.
The new Zero arborist chainsaw pants do the same as the first version. But better. Like the original, it embraces your movements: you are able to stretch, climb and jump freely. With the Gen2, you don't have to be as worried about tears and rips – the outer fabric of the garment been reinforced! Of course, Zero's fit and style stays the same. You will look good in the trees… or in the ground!
• UL Certified to ASTM F1897-14 and meets OSHA regulation 1910-266
• Uses Arrestex HP advanced chainsaw protection material which is light, cool and quick drying, rated to 3,500 ft/min
• Lightweight design, just 2 lbs 3 oz
• Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit Breeze yarn - Nilit is proven to reduce body temperature
• 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give
• High-tenacity nylon and a ripstop weave for a 1.5x stronger outer
• Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
• Ultra-high tear strength UHMWPE fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness
• Elasticized waist for a snug fit and extra comfort
• Wide belt loops to fit up to 2 inch belt
• Stronger and more durable zippers with a better seal to reduce the risk of sawdust damage
• Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves
• Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust with additional pocket on the left thigh, all accessible while wearing a harness
• High-visibility panels front and rear
• Tough, large always open mesh vents at rear of both legs for cooling
• Lace hooks to prevent the pants from riding up
• Slim fit with a just the right amount of fabric for easily movement
• Available in grey and hi-visibility orange with the option of 360 calf wrap additional protection
WHY WE MADE THIS:
Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer and abrasion resistant sections.
CERTIFICATIONS:
UL Certified to CAN/BNQ 1923-450-1 - exceeds WCB standard for British Columbia
Fit & Sizing:
Slim "movement-ready" cut with plenty of stretch. Extra leg length is to allow for knee flex, especially when wearing climbing spurs. See the sizing chart for jean-equivalent sizes.
Specifications
Clogger Zero Gen2 Men's Chainsaw Pants - MLR Version
Part Number: TU71ZS-MLR Weight: 3.3 lbs.
- Description
- Ask a Question
- Reviews
The first generation of the Zero has been a game changer for the industry. The first lightweight, cool arborist chainsaw pants. With Zero, you don’t sweat all day long when you are climbing.
The new Zero arborist chainsaw pants do the same as the first version. But better. Like the original, it embraces your movements: you are able to stretch, climb and jump freely. With the Gen2, you don't have to be as worried about tears and rips – the outer fabric of the garment been reinforced! Of course, Zero's fit and style stays the same. You will look good in the trees… or in the ground!
• UL Certified to ASTM F1897-14 and meets OSHA regulation 1910-266
• Uses Arrestex HP advanced chainsaw protection material which is light, cool and quick drying, rated to 3,500 ft/min
• Lightweight design, just 2 lbs 3 oz
• Outer fabric, engineered to lower body temperature by dispersing body heat through breathability and the use of Nilit Breeze yarn - Nilit is proven to reduce body temperature
• 4-way stretch fabric for greater freedom of movement and flexibility with elasticized thread in the seat for extra give
• High-tenacity nylon and a ripstop weave for a 1.5x stronger outer
• Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
• Ultra-high tear strength UHMWPE fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness
• Elasticized waist for a snug fit and extra comfort
• Wide belt loops to fit up to 2 inch belt
• Stronger and more durable zippers with a better seal to reduce the risk of sawdust damage
• Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves
• Two zipped hip pockets; two zipped thigh pockets individually sewn to be able to remove saw dust with additional pocket on the left thigh, all accessible while wearing a harness
• High-visibility panels front and rear
• Tough, large always open mesh vents at rear of both legs for cooling
• Lace hooks to prevent the pants from riding up
• Slim fit with a just the right amount of fabric for easily movement
• Available in grey and hi-visibility orange with the option of 360 calf wrap additional protection
WHY WE MADE THIS:
Designed for the climbing arborist who works in hot conditions, these pants are cool and light but still tough with a ripstop outer and abrasion resistant sections.
CERTIFICATIONS:
UL Certified to CAN/BNQ 1923-450-1 - exceeds WCB standard for British Columbia
Fit & Sizing:
Slim "movement-ready" cut with plenty of stretch. Extra leg length is to allow for knee flex, especially when wearing climbing spurs. See the sizing chart for jean-equivalent sizes.
