EMG Giant Lifting Bag For Pallet

4467 6

Description
Ask a Question
Reviews

"*NOTE: The bag is NOT sold with a pallet as shown in the picture above.
• It is possible to attach a pallet underneath the bag for easier movement on the ground. This is done by guiding polyamide ribbons underneath the bag and pallet and through stainless steel buckles.
• The bag is made from a heavy tarpaulin material making it strong and water repellent.
• 4467 uses 4 lifting straps which are made of high quality polyamide webbing.
• Stainless steel buckles are used to tighten and strengthen the walls of the bag.
• The lid is closed by velcro and 50mm plastic buckles around the sides of the bag.
• The front of the bag can be opened, folded and used as a ”gate” making it easier to fill the bag and making it possible to place an entire pallet inside using a fork lift.
• A plastic tube is placed inside the top of the ”gate” for rolling the fabric.
• The front opens by zippers on each side.
• A removable velcro patch for easy logo printing is placed on the front of the bag.
• A transparent plastic pocket for A4-documentation or markings is placed in each end of the bag. The pockets are attached by velcro and can be easily removed.
• The bottom cover is made of PEHD plastic to prolong the life span of the bag and offer weight distribution.
• Hard plastic plates are placed inside the walls of the bag.
• A 20 mm PVC plate is placed inside the bag to offer protection and weight distribution.
• The walls can be taken out and placed in the bottom of the bag to lessen the space consumption of the bag when transporting or storing it.
• The bottom cover is detachable and can be replaced, if needed

DIMENSIONS:
• OPEN: 130 x 90 x 110 cm (LxWxH)
• CLOSED: 130 x 90 x 110 cm (LxWxH)
• LIFTING HEIGHT: 200 cm

MATERIAL
• MAIN MATERIAL: Tarpaulin 0.75 mm,
• BOTTOM COVER: Acrylonitrile Butadiene Styrene (ABS) Plastic,
• SLINGS / RIBBON: 50 mm Polyamide,
• BUCKLES: Plastic

OTHER
• UPRIGHT INCLUDED: Yes"